마이크로비젼 기술지원팀입니다.
아래 방법을 참고하여 작업을 진행해 보시길 바랍니다.
\s3c-linux-2.6.24 안에 mv2450_defconfig 파일을 vi 편집기로 아래와 같이 수정을 합니다.
CONFIG_CMDLINE="noinitrd console=ttyS1,115200 root=/dev/nfs rw nfsroot=192.168.0.177:/2450
ip=192.168.0.236:192.168.0.177:192.168.0.177:255.255.255.0:test::off mem=128M"
위와 같이 수정을 하신 후에 저장을 하시고 아래 명령어를 실행합니다.
# make mv2450_defconfig
#make menuconfig
File systems --->
[*] Network File Systems --->
<*> NFS file system support │ │
│ │ [*] Provide NFSv3 client support │ │
│ │ [ ] Provide client support for the NFSv3 ACL pr │ │
│ │ [ ] Provide NFSv4 client support (EXPERIMENTAL) │ │
│ │ [ ] Allow direct I/O on NFS files │ │
│ │ < > NFS server support │ │
│ │ [*] Root file system on NFS
위와 같이 설정을 완료한 후에 저장 종료한 후에 새롭게 이미지를 생성하여 보드에 wirte하여 테스트를 진행하시면 됩니다.