마이크로비젼 기술지원팀입니다.
아래 방법을 참고하여 작업을 진행해 보시길 바랍니다.
제공해 드린 u-boot소스에서 다음 경로로 진입을 합니다.
(*SD Card를 사용하기 전에 먼저 format를 한 후에 진행을 하시길 바랍니다.)
#cd u-boot-mv4412_mr-dev/sd_fuse/smdk4412
명령어 실행.
#sudo ./sd_fusing.sh /dev/sdb E4412_S.bl1.bin
위와 같이 정상적으로 성공을 하면 보드에서 부팅이 되는지 확인을 합니다.
보드 스위치 설정.
- 010000
SD card를 아래 SD port에 삽입 후에 전원을 공급합니다.
[출력 메시지]
U-Boot 2010.12 (Oct 17 2012 - 09:34:16) for SMDK4412
CPU: S5PC220 [Samsung SOC on SMP Platform Base on ARM CortexA9]
APLL = 1200MHz, MPLL = 800MHz
DRAM: 1023 MiB
vdd_arm: 1200
vdd_int: 1000
vdd_g3d: 1100
vdd_mif: 1100
TrustZone Enabled BSP
BL1 version: 20120913
Checking Boot Mode ... SDMMC
REVISION: 1.1
MMC Device 0: 1886 MB
NAME: S5P_MSHC4
MMC Device 1: 3728 MB
MMC Device 2 not found
*** Warning - using default environment
Net: smc911x-0
Hit any key to stop autoboot: 0
reading kernel..device 0 Start 1063, Count 8192
MMC read: dev # 0, block # 1063, count 8192 ... 8192 blocks read: OK
completed
reading RFS..device 0 Count 9255, Start 2048
MMC read: dev # 0, block # 9255, count 2048 ... 2048 blocks read: OK
completed
Wrong Image Format for bootm command
ERROR: can't get kernel image!
SMDK4412 #