제공한 u-boot, kernel, ramdisk로 Linux부팅시 아래와 같이 Kernel panic이 발생합니다.

u-boot 환경변수 또는 이미지가 잘못 된것 같습니다.

확인 부탁드립니다.

혹시 환경변수 문제가 없으면 이미지 보내주시기 바랍니다.

메세지는 u-boot와 부팅시 에러를 캡처한 내용입니다.

jwpark99@from2.co.kr 로 회신 부탁드립니다.

이상입니다.

-------------------------------------------------------------------

U-Boot 2010.03 (Sep 29 2011 - 23:02:44) for SMDKV310 Android

        APLL = 1000MHz, MPLL = 800MHz
PMIC:   ARM 1.30V, INT 1.15V, G3D 1.10V
Board:  smdkv310
MV-DRAM:         1 GB
MMC:    7576 MB
In:    serial
Out:   serial
Err:   serial

Checking Boot Mode ... EMMC4.3
board_late_init
Hit any key to stop autoboot:  0
MVV310eMMC # print
bootdelay=3
baudrate=115200
ipaddr=192.168.1.201
serverip=192.168.1.3
gatewayip=192.168.1.1
netmask=255.255.255.0
ethaddr=aa:bb:cc:dd:ee:ff
bootargs=console=ttySAC1,115200 init=/linuxrc root=/dev/ram consoleblank=0 mem=512M ethaddr=aa:bb:cc:dd:ee:ff
stdin=serial
stdout=serial
stderr=serial
bootcmd=movi read kernel 40008000;movi read rootfs 41000000 300000;bootm 40008000 41000000

Environment size: 382/16380 bytes
MVV310eMMC #

 ------------------------------------------------ 부팅 메세지 ---------------------------------

U-Boot 2010.03 (Sep 29 2011 - 23:02:44) for SMDKV310 Android

        APLL = 1000MHz, MPLL = 800MHz
PMIC:   ARM 1.30V, INT 1.15V, G3D 1.10V
Board:  smdkv310
MV-DRAM:         1 GB
MMC:    7576 MB
In:    serial
Out:   serial
Err:   serial

Checking Boot Mode ... EMMC4.3
board_late_init
Hit any key to stop autoboot:  0
reading kernel.. 1120, 8192
MMC read: dev # 0, block # 1120, count 8192 ...8192 blocks read: OK
completed
reading RFS.. 9312, 6144
MMC read: dev # 0, block # 9312, count 6144 ...6144 blocks read: OK
completed
Boot with zImage
Wrong Ramdisk Image Format
[err] boot_get_ramdisk

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Initializing cgroup subsys cpu
Linux version 2.6.35.7 (root@ubuntu) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #16 SMP PREEMPT Thu Sep 29 22:25:02 PDT 2011
CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: SMDKV310
Memory policy: ECC disabled, Data cache writealloc
CPU S5PV310 (id 0x43210011)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
s3c_register_clksrc: clock armclk has no registers set
mout_audss: bad source 0
S5PV310: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000
ACLK100=100000000, ACLK160=160000000, ACLK133=133333333
uclk1: source is mout_mpll (6), rate is 100000000
uclk1: source is mout_mpll (6), rate is 100000000
uclk1: source is mout_mpll (6), rate is 100000000
uclk1: source is mout_mpll (6), rate is 100000000
uclk1: source is mout_mpll (6), rate is 100000000
sclk_pwm: source is ext_xtal (0), rate is 24000000
sclk_csis: source is xusbxti (1), rate is 24000000
sclk_csis: source is xusbxti (1), rate is 24000000
sclk_cam0: source is xusbxti (1), rate is 24000000
sclk_cam1: source is xusbxti (1), rate is 24000000
sclk_fimc: source is xusbxti (1), rate is 24000000
sclk_fimc: source is xusbxti (1), rate is 24000000
sclk_fimc: source is xusbxti (1), rate is 24000000
sclk_fimc: source is xusbxti (1), rate is 24000000
sclk_mixer: source is sclk_dac (0), rate is 24000000
sclk_fimd: source is xusbxti (1), rate is 24000000
sclk_fimd: source is xusbxti (1), rate is 24000000
sclk_sata: source is mout_mpll (0), rate is 133333333
sclk_spi: source is xusbxti (1), rate is 24000000
sclk_spi: source is mout_mpll (6), rate is 80000000
sclk_spi: source is xusbxti (1), rate is 24000000
sclk_fimg2d: source is mout_g2d0 (0), rate is 100000000
sclk_mfc: source is mout_mfc0 (0), rate is 200000000
sclk_g3d: source is mout_g3d0 (0), rate is 166666666
sclk_pwi: source is xusbxti (1), rate is 12000000
mem infor: bank0 start-> 0x40000000, bank0 size-> 0x20000000
bank1 start-> 0x50000000, bank1 size-> 0x10000000
CMA reserve : fimg2d, addr is 0x5f800000, size is 0x800000
CMA reserve : jpeg, addr is 0x5f700000, size is 0x100000
CMA reserve : fimc3, addr is 0x5e800000, size is 0xf00000
CMA reserve : fimc2, addr is 0x5d000000, size is 0x1800000
CMA reserve : fimc1, addr is 0x5c100000, size is 0xf00000
CMA reserve : fimc0, addr is 0x5b200000, size is 0xf00000
CMA reserve : mfc1, addr is 0x58e00000, size is 0x2400000
CMA reserve : mfc0, addr is 0x56a00000, size is 0x2400000
CMA reserve : fimd, addr is 0x55b00000, size is 0xf00000
PERCPU: Embedded 7 pages/cpu @c0aeb000 s5952 r8192 d14528 u65536
pcpu-alloc: s5952 r8192 d14528 u65536 alloc=16*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
Kernel command line: console=ttySAC1,115200 init=/linuxrc root=/dev/ram consoleblank=0 mem=512M ethaddr=aa:bb:cc:dd:ee:ff
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512MB = 512MB total
Memory: 343712k/343712k available, 180576k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xff600000 - 0xffe00000   (   8 MB)
    vmalloc : 0xe0800000 - 0xf0000000   ( 248 MB)
    lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .init : 0xc0008000 - 0xc0034000   ( 176 kB)
      .text : 0xc0034000 - 0xc05a7000   (5580 kB)
      .data : 0xc05c8000 - 0xc061d1c0   ( 341 kB)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
        RCU-based detection of stalled CPUs is disabled.
        Verbose stalled-CPUs detection is disabled.
NR_IRQS:636
Console: colour dummy device 80x30
console [ttySAC1] enabled
Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys cpuacct
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
s5pv310_subrev: 1
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache Size: 1048576 B
>made stopper
>made stopper
CPU1: Booted secondary processor
Brought up 2 CPUs
SMP: Total of 2 processors activated (3984.58 BogoMIPS).
********************** ASV *********************
ASV ids_arm = 23 hpm_delay = 25
ASV ids_group = 4 hpm_group = 6 asv_group=4
regulator: core version 0.5
NET: Registered protocol family 16
S3C Power Management, Copyright 2004 Simtec Electronics
s3c_rtc_base: e0808000
        #LED4 OFF
S5PV310: Initializing architecture
samsung-pd samsung-pd.0: power domain registered
samsung-pd samsung-pd.1: power domain registered
samsung-pd samsung-pd.2: power domain registered
samsung-pd samsung-pd.3: power domain registered
samsung-pd samsung-pd.5: power domain registered
samsung-pd samsung-pd.6: power domain registered
samsung-pd samsung-pd.4: power domain registered
s3c24xx-pwm s3c24xx-pwm.0: tin at 100000000, tdiv at 100000000, tin=divclk, base 0
s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk, base 8
s3c24xx-pwm s3c24xx-pwm.2: tin at 100000000, tdiv at 100000000, tin=divclk, base 12
s3c24xx-pwm s3c24xx-pwm.3: tin at 100000000, tdiv at 100000000, tin=divclk, base 16
UMP: UMP device driver  loaded
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c-gpio i2c-gpio.8: using pins 178 (SDA) and 177 (SCL)
s3c-i2c s3c2440-i2c.0: slave address 0x10
s3c-i2c s3c2440-i2c.0: bus frequency set to 97 KHz
max8649 0-0060: Detected max8952 (ID: 0x201a)
regulator: vdd_arm range: 770 <--> 1400 mV at 1300 mV
max8649 0-0060: max8952 regulator device is detected.
s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
s3c-i2c s3c2440-i2c.1: slave address 0x10
s3c-i2c s3c2440-i2c.1: bus frequency set to 390 KHz
max8649 1-0060: Detected max8952 (ID: 0x201a)
regulator: vdd_int range: 770 <--> 1380 mV at 1170 mV
max8649 1-0060: max8952 regulator device is detected.
s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
s3c-i2c s3c2440-i2c.2: slave address 0x10
s3c-i2c s3c2440-i2c.2: bus frequency set to 65 KHz
max8649 2-0060: Detected max8952 (ID: 0x201a)
regulator: vdd_g3d range: 900 <--> 1200 mV at 1050 mV
max8649 2-0060: max8952 regulator device is detected.
s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
s3c-i2c s3c2440-i2c.3: slave address 0x10
s3c-i2c s3c2440-i2c.3: bus frequency set to 97 KHz
s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
s3c-i2c s3c2440-i2c.4: slave address 0x10
s3c-i2c s3c2440-i2c.4: bus frequency set to 97 KHz
s3c-i2c s3c2440-i2c.4: i2c-4: S3C I2C adapter
s3c-i2c s3c2440-i2c.5: slave address 0x10
s3c-i2c s3c2440-i2c.5: bus frequency set to 97 KHz
s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter
s3c-i2c s3c2440-i2c.6: slave address 0x10
s3c-i2c s3c2440-i2c.6: bus frequency set to 97 KHz
s3c-i2c s3c2440-i2c.6: i2c-6: S3C I2C adapter
s3c-i2c s3c2440-i2c.7: slave address 0x10
s3c-i2c s3c2440-i2c.7: bus frequency set to 97 KHz
s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
Advanced Linux Sound Architecture Driver Version 1.0.23.
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource mct-frc
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PMU: registered new PMU device of type 0
Loaded driver for PL330 DMAC-1 s3c-pl330
        DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
Loaded driver for PL330 DMAC-2 s3c-pl330
        DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
ashmem: initialized
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 671
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Console: switching to colour frame buffer device 128x37
FIMD src sclk = 800000000
s3cfb s3cfb.0: registered successfully
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
s5pv210-uart.0: s3c2410_serial0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10
s5pv210-uart.1: s3c2410_serial1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10
s5pv210-uart.2: s3c2410_serial2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10
s5pv210-uart.3: s3c2410_serial3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10
s5pv210-uart.4: s3c2410_serial4 at MMIO 0x13840000 (irq = 560) is a S3C6400/10
brd: module loaded
loop: module loaded
at24 0-0050: 16384 byte 24c128 EEPROM (writable)
at24 0-0052: 16384 byte 24c128 EEPROM (writable)
Android kernel panic handler initialized (bind=kpanic)
ahci ahci.0: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
ahci ahci.0: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
scsi0 : ahci
ata1: SATA max UDMA/133 mmio [mem 0x12560000-0x1257ffff] port 0x100 irq 126
Samsung OneNAND Driver (AUDI).
OneNAND: Clock gating is enabled.
smsc911x: Driver version 2008-10-21.
smsc911x-mdio: probed
eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=ffffffff:01, irq=-1)
net eth0: MAC Address: 00:80:00:23:45:67
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
s5p-ehci s5p-ehci: s5pv210 EHCI
s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
s5p-ehci s5p-ehci: irq 109, io mem 0x12580000
s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
s3c-udc : version 15 March 2009 (DMA Mode)
g_ether gadget: using random self ethernet address
g_ether gadget: using random host ethernet address
usb0: MAC 56:89:ba:3c:dd:b5
usb0: HOST MAC 02:1b:aa:36:f6:5a
g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
g_ether gadget: g_ether ready
Registered gadget driver 'g_ether'
mice: PS/2 mouse device common for all mice
input: s3c-keypad as /devices/virtual/input/input0
s3c-keypadInitialized
S3C Keypad Driver
input: EP0700 Touchscreen as /devices/virtual/input/input1
ep0700_probe OK
input: compass as /devices/virtual/input/input2
id:0 CMA3000_DEVICE_ID:37
SUCCESS: Sensor CMA3000(CHIP:0 REV:0)
CMA3000 regs: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
read time 21.27.59 00/01/18
using rtc device, s3c, for alarms
s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
i2c /dev entries driver
Linux video capture interface: v2.00
s3c-csis: Samsung MIPI-CSIS0 driver probed successfully
s3c-csis: Samsung MIPI-CSIS1 driver probed successfully
Initialize JPEG driver
i2c i2c-1: attached s5p_ddc into i2c adapter successfully
S5P HPD Driver, (c) 2009 Samsung Electronics
S5P CEC Driver, (c) 2009 Samsung Electronics
sysmmu_set_tablebase: CP15 TTBR0 : 0x40004000
sysmmu_set_tablebase: SYSMMU_G2D sysmmuconp->regs + S5P_PT_BASE_ADDR:0xE09C0014
ata1: SATA link down (SStatus 0 SControl 300)
sysmmu_on:SYSMMU_G2D sysmmuconp->regs + S5P_MMU_CTRL:0xE09C0000, reg:0x5
MFC(Multi Function Codec - FIMV v5.x) registered successfully
Mali: init_mali_clock mali_clock c05e1470
Mali: Mali device driver  loaded
s3c_bat_init
sec-fake-battery sec-fake-battery: s3c_bat_probe
cpuidle: using governor ladder
cpuidle: using governor menu
mshci: Mobile Storage Host Controller Interface driver
mshci: Copyright(c) Pierre Ossman
s3c-mshci s3c-mshci.0: clock source 0: sclk_mshc (160000000 Hz)
mmc0: Version ID 0x5342230a.
mmc0: FIFO WMARK FOR RX 0x20 WX 0x1. ###########
mmc0: MSHCI controller on samsung-mshci [s3c-mshci.0] using IDMA
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (88888888 Hz)
mmc1: no vmmc regulator found
mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (88888888 Hz)
mmc0: cmd 52 response timeout error
mmc0: cmd 52 response timeout error
mmc2: no vmmc regulator found
mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
mmc0: cmd 8 response timeout error
mmc0: cmd 5 response timeout error
mmc0: cmd 5 response timeout error
mmc0: cmd 5 response timeout error
mmc0: cmd 5 response timeout error
mmc0: cmd 55 response timeout error
mmc0: cmd 55 response timeout error
mmc0: cmd 55 response timeout error
mmc0: cmd 55 response timeout error
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
logger: created 64K log 'log_system'
asoc: WM8580 PAIFRX <-> s3c64xx-i2s-v4 mapping ok
ALSA device list:
  #0: SMDK (WM8580)
TCP cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
mmc0: switch to bus width 32 failed
++ s5pv310_cpufreq_init
pro_id: 0x43210011
pkg_id: 0x17195000
armclk set max 1000000
@@@@@ armclk set max 1000MHz @@@@@
index = 0, frequency = 1000000
index = 1, frequency = 800000
index = 2, frequency = 500000
index = 3, frequency = 200000
index = 0, arm_volt = 1300000
index = 1, arm_volt = 1200000
index = 2, arm_volt = 1100000
index = 3, arm_volt = 1050000
apll pms_table = 0x00fa0601
apll pms_table = 0x00c80601
apll pms_table = 0x00fa0602
apll pms_table = 0x00c80603
0, 3, 7, 3, 4, 1, 7,
0, 3, 7, 3, 3, 1, 7,
0, 3, 7, 3, 3, 1, 7,
0, 1, 3, 1, 3, 1, 7,
4, 0,
3, 0,
3, 0,
3, 0,
@@@@@ updated dvfs table @@@@@@
CPUFREQ: Recognized ASV Group(4) from INFORM2 Register
ASV voltage_table[0].arm_volt = 1150000
ASV voltage_table[1].arm_volt = 1050000
ASV voltage_table[2].arm_volt = 975000
ASV voltage_table[3].arm_volt = 950000
ASV voltage_table[0].int_volt = 1100000
ASV voltage_table[1].int_volt = 1000000
ASV voltage_table[2].int_volt = 975000
ASV Voltage Initial Set: arm_index 0, arm_volt 1150000
ASV Voltage Initial Set: int_index 0, int_volt 1100000
-- s5pv310_cpufreq_init
mmc0: new high speed MMC card at address 0001
s5pv310_pm_hotplug_device_init: 0
mmcblk0: mmc0:0001 SEM08G 7.39 GiB
SMDKV310 PM-hotplug init function
 mmcblk0:
SMDKV310 Button init function
wake enabled for irq 595
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
 p1 p2 p3 p4
read time 21.28.00 00/01/18
s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-18 21:28:00 UTC (948230880)
        # fimc_probe
ctrl->mem.size = 0xf00000
ctrl->mem.base = 0x5b200000
FIMC0 registered successfully
        # fimc_probe
ctrl->mem.size = 0xf00000
ctrl->mem.base = 0x5c100000
FIMC1 registered successfully
        # fimc_probe
ctrl->mem.size = 0x1800000
ctrl->mem.base = 0x5d000000
FIMC2 registered successfully
        # fimc_probe
ctrl->mem.size = 0xf00000
ctrl->mem.base = 0x5e800000
FIMC3 registered successfully
S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics
yaffs: dev is 1048576 name is "ram0" rw
yaffs: passed flags ""
yaffs: dev is 1048576 name is "ram0" rw
yaffs: passed flags ""
List of all partitions:
b300         7755776 mmcblk0 driver: mmcblk
  b301         7377480 mmcblk0p1
  b302          129030 mmcblk0p2
  b303          106260 mmcblk0p3
  b304          106260 mmcblk0p4
No filesystem could mount root, tried:  ext2 ext3 ext4 cramfs vfat msdos romfs yaffs yaffs2
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0)
CPU1: stopping
[<c003c2a0>] (unwind_backtrace+0x0/0xfc) from [<c003431c>] (do_IPI+0xf4/0x140)
[<c003431c>] (do_IPI+0xf4/0x140) from [<c0034d0c>] (__irq_svc+0x4c/0xe8)
Exception stack(0xd5451f58 to 0xd5451fa0)
1f40:                                                       02b212f5 3884dae0
1f60: 00000000 000ac84b c061d9d8 00000000 c0afb0d0 c05e04b8 ffffffff 412fc091
1f80: c0afb0c0 00000000 2a1e683a d5451fa0 2a057241 c00465bc 80000013 ffffffff
[<c0034d0c>] (__irq_svc+0x4c/0xe8) from [<c00465bc>] (s5pv310_enter_idle+0x148/0x17c)
[<c00465bc>] (s5pv310_enter_idle+0x148/0x17c) from [<c034d700>] (cpuidle_idle_call+0xa0/0x10c)
[<c034d700>] (cpuidle_idle_call+0xa0/0x10c) from [<c0036ba8>] (cpu_idle+0xb8/0xec)
[<c0036ba8>] (cpu_idle+0xb8/0xec) from [<40008080>] (0x40008080)