>3번째 질문인데요...
>
>아무리 알려주신데로 usb모드로 포팅을 해도 검은 화면만 뜸니다.
>
>어떻해야하나요??
>
>툴은 주신 자료대로 화면이 나왔습니다.
아래를 참고하여 작업을 진행하시길 바랍니다.
MV6410 # dnw -> USB Port -> Transmit -> Transmit -> u-boot.bin
Insert a OTG cable into the connector!
OTG cable Connected!
Now, Waiting for DNW to transmit data
Download Done!! Download Address: 0xc0000000, Download Filesize:0x34000
Checksum is being calculated.
Checksum O.K.
MV6410 # nand write c0000000 0 40000
NAND write: device 0 offset 0x0, size 0x40000
262144 bytes written: OK
MV6410 # dnw -> USB Port -> Transmit -> Transmit -> zImage
Insert a OTG cable into the connector!
OTG cable Connected!
Now, Waiting for DNW to transmit data
Download Done!! Download Address: 0xc0000000, Download Filesize:0x196444
Checksum is being calculated..
Checksum O.K.
MV6410 # nand write c0000000 40000 1c0000
NAND write: device 0 offset 0x40000, size 0x1c0000
1835008 bytes written: OK
MV6410 # dnw -> USB Port -> Transmit -> Transmit -> rootfs.cramfs
Insert a OTG cable into the connector!
OTG cable Connected!
Now, Waiting for DNW to transmit data
Download Done!! Download Address: 0xc0000000, Download Filesize:0x11e0000
Checksum is being calculated..................
Checksum O.K.
MV6410 # nand write c0000000 200000 3000000
NAND write: device 0 offset 0x200000, size 0x3000000
50331648 bytes written: OK
MV6410 # OK
위 와 같이 메시지가 출력된 후에 보드를 다시 부팅하시면 Linux가 올라간 것을 확인 할 수 있습니다.
|