마이크로비젼 기술지원팀입니다.

당사에서 테스트 해 봤을때는 Drivers/video/Samsung/s3cfb_lte480wv.c 와
make menuconfig 부분 이외에 따로 수정한 부분은 없습니다.

적어주신 글 내용중에 make menuconfig를 설정하는 부분에서
Memory size in kbytes for FIMD 메뉴가 안보인다고 하셨는데
다시 확인해 보시기 바랍니다.
그 부분에서 메모리 size를 늘려줘야 정상적으로 화면에 나타납니다.

FIMD Memory 계산법은 아래와 같습니다.
(RES_X*RES_Y*8) / 1024
1024*768인경우 FIMD_MEM_KB = 6144

DVI해상도 수정은 아래 부분을 한번 확인해 보시길 바랍니다.
/kernel/drivers/video폴더에서 sil9134.c파일을 수정하여 해상도를 변경하시면 될 것 같습니다.
그리고 LCD resolution부분도 같이 확인을 하시길 바랍니다.


==========================================================================================

>얼마 전에 MV V210 보드를 구입하여 현재 테스트 중에 어려움이 있어서 문의 드립니다.
>
>보드 후면에 MV V210 V1.2 2010. 06. 17일 날짜로 되어 있네요..
>
>*. 해상도 변경 관련하여.....
>
>앞의 게시글에 따르면
>
>drivers/video/Samsung/s3cfb_lte480wv.c
>
>static struct s3cfb_lcd lte480wv = {
> .width = 1280,
> .height = 1024,
> .bpp = 21,
> .freq = 60,
>여기에서 원하는 해상도 변경하고,
>
>#make menuconfig
>
>Device Drivers
> Graphics support
> <*> Support for frame buffer devices
> (3072) Memory size in kbytes for FIMD
>FIMD 수정하라고 하셨는데...
>Memory size in kbytes for FIMD <-- 이러한 메뉴는 안보이네요.
>
>그래서 해상도만 수정해서 커널을 올려도 변화가 없네요.
>
>
>arch/arm/mach-s5pv210/mach-smdkc110.c
>
>#if defined(CONFIG_FB_SIL9134) // KSSON20110307
>#define S5PV210_LCD_WIDTH 1024
>#define S5PV210_LCD_HEIGHT 768
>#else // SMDKV210
>#define S5PV210_LCD_WIDTH 800 <== 가로 수정
>#define S5PV210_LCD_HEIGHT 480 <== 세로 수정
>#endif // KSSON20110307
>
>저 부분을 수정하니 해상도 변경을 해보았습니다.
>메모리 부분도 계산되어 변경되는거 같구요.
>은 되는듯 싶던데, 수정한데로 나오는거 같지도 않구요...
>
>
>
>*. DVI 출력 관련하여..
>1024x768 해상도로 DVI 출력을 하고 싶은데..
>
>제품소개에 지원된다고는 했는데, 자료가 없네요.
>
>-------------------------------------------------------------------------------
>
>1. 해상도 변경에 대해서 좀더 상세한 설명을 해주시기 바랍니다..
>2. 1024x768 해상도로 DVI 출력을 원합니다. 방법을 알려주셨으면 합니다.
>
>
>
>
>
>Starting kernel ...
>
>
>Uncompressing Linux... done, booting the kernel.
>Initializing cgroup subsys cpu
>Linux version 2.6.35.7 (test@ubuntu) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #230 PREEMPT Mon Jan 9 15:07:12 KST 2012
>CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f
>CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
>Machine: SMDKV210
>Ignoring unrecognised tag 0x00000000
>Ignoring unrecognised tag 0x00000000
>Ignoring unrecognised tag 0x41001099
>Memory policy: ECC disabled, Data cache writeback
>CPU S5PV210/S5PC110 (id 0x43110220)
>S3C24XX Clocks, Copyright 2004 Simtec Electronics
>S5PV210: PLL settings, A=1000000000, M=667000000, E=80000000 V=54000000
>S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000
>HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
>sclk_dmc: source is sclk_a2m (0), rate is 200000000
>sclk_onenand: source is hclk_dsys (1), rate is 83375000
>sclk: source is mout_mpll (6), rate is 66700000
>sclk: source is mout_mpll (6), rate is 66700000
>sclk: source is mout_mpll (6), rate is 66700000
>sclk: source is mout_mpll (6), rate is 66700000
>sclk_mixer: source is sclk_dac (0), rate is 54000000
>sclk_spdif: source is sclk_audio (0), rate is 24000000
>sclk_fimc: source is ext_xtal (0), rate is 24000000
>sclk_fimc: source is ext_xtal (0), rate is 24000000
>sclk_fimc: source is ext_xtal (0), rate is 24000000
>sclk_cam0: source is ext_xtal (0), rate is 24000000
>sclk_cam1: source is ext_xtal (0), rate is 24000000
>sclk_fimd: source is ext_xtal (0), rate is 24000000
>sclk_mmc: source is mout_mpll (6), rate is 47642857
>sclk_mmc: source is mout_epll (7), rate is 80000000
>sclk_mmc: source is mout_mpll (6), rate is 47642857
>sclk_mmc: source is mout_epll (7), rate is 80000000
>sclk_mfc: source is sclk_a2m (0), rate is 200000000
>sclk_g2d: source is sclk_a2m (0), rate is 200000000
>sclk: source is sclk_a2m (0), rate is 200000000
>sclk_csis: source is ext_xtal (0), rate is 24000000
>sclk_spi: source is ext_xtal (0), rate is 24000000
>sclk_spi: source is ext_xtal (0), rate is 24000000
>sclk_pwi: source is ext_xtal (0), rate is 24000000
>sclk_pwm: source is ext_xtal (0), rate is 24000000
>sclk_mdnie: source is ext_xtal (0), rate is 24000000
>sclk_mdnie_pwm: source is ext_xtal (0), rate is 24000000
>s5pv210: 37748736 bytes system memory reserved for mfc at 0x21023000
>s5pv210: 37748736 bytes system memory reserved for mfc at 0x40000000
>s5pv210: 6291456 bytes system memory reserved for fimc0 at 0x42400000
>s5pv210: 10137600 bytes system memory reserved for fimc1 at 0x42a00000
>s5pv210: 6291456 bytes system memory reserved for fimc2 at 0x433ab000
>s5pv210: 8388608 bytes system memory reserved for jpeg at 0x439ab000
>s5pv210: 6144000 bytes system memory reserved for fimd at 0x441ab000
>s5pv210: 3072000 bytes system memory reserved for texstream at 0x44787000
>s5pv210: 1536000 bytes system memory reserved for pmem_gpu1 at 0x44a75000
>s5pv210: 1048576 bytes system memory reserved for g2d at 0x44bec000
>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129536
>Kernel command line: console=ttySAC2,115200 init=/linuxrc ethaddr=00:40:5c:26:0a:5b
>PID hash table entries: 2048 (order: 1, 8192 bytes)
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 256MB 256MB = 512MB total
>Memory: 397596k/397596k available, 126692k reserved, 0K highmem
>Virtual kernel memory layout:
> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
> DMA : 0xff000000 - 0xffe00000 ( 14 MB)
> vmalloc : 0xf0800000 - 0xfc000000 ( 184 MB)
> lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
> modules : 0xbf000000 - 0xc0000000 ( 16 MB)
> .init : 0xc0008000 - 0xc002d000 ( 148 kB)
> .text : 0xc002d000 - 0xc0546000 (5220 kB)
> .data : 0xc0546000 - 0xc058b040 ( 277 kB)
>SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>Hierarchical RCU implementation.
> RCU-based detection of stalled CPUs is disabled.
> Verbose stalled-CPUs detection is disabled.
>NR_IRQS:393
>VIC @fd000000: id 0x00041192, vendor 0x41
>VIC @fd010000: id 0x00041192, vendor 0x41
>VIC @fd020000: id 0x00041192, vendor 0x41
>VIC @fd030000: id 0x00041192, vendor 0x41
>mult[140737]
>max_delta_ns[2937815369]
>min_delta_ns[30517]
>rate[32768]
>HZ[256]
>console [ttySAC2] enabled
>Calibrating delay loop... 998.15 BogoMIPS (lpj=1949696)
>pid_max: default: 32768 minimum: 301
>Mount-cache hash table entries: 512
>Initializing cgroup subsys debug
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys freezer
>CPU: Testing write buffer coherency: ok
>regulator: core version 0.5
>NET: Registered protocol family 16
>SPI.0 s3cspi_set_slaves
>SPI.1 s3cspi_set_slaves
>S3C Power Management, Copyright 2004 Simtec Electronics
>pmstats at 00000000
>smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
>smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
>smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
>mvv210_ps_hold_enable : setting GPIO_PDA_PS_HOLD Enable.[0x5331]
>S5PV210: Initializing architecture
>s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
>s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
>s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000, tin=divclk, base 12
>s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000, tin=divclk, base 16
>regulator: pd_audio_supply: 5000 mV normal
>regulator: pd_cam_supply: 5000 mV normal
>regulator: pd_tv_supply: 5000 mV normal
>regulator: pd_lcd_supply: 5000 mV normal
>regulator: pd_g3d_supply: 5000 mV normal
>regulator: pd_mfc_supply: 5000 mV normal
>bio: create slab <bio-0> at 0
>SCSI subsystem initialized
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
>s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
>regulator: VALIVE_1.1V: 1100 mV
>regulator: {VDD_PLL_AP/LDO3}_AP: 1100 mV
>regulator: VDD_LCD_AP_3.0V: 1800 mV
>regulator: VDD_LCD_AP_3.0V: 2800 mV
>regulator: VDD_CAM_AP: 2600 mV
>regulator: {VDD_ADC_AP/VDD_DAC_AP/VDD_HDMI_OSC}_3.3V: 2800 mV
>regulator: LDO8_AP_3.3V: 3300 mV
>regulator: {VADC/VSYS/VKEY}_3.0V: 3000 mV
>regulator: VCC_ARM: 750 <--> 1500 mV at 1200 mV
>regulator: VCC_INTERNAL: 950 <--> 1200 mV at 1200 mV
>regulator: VCC_MEM: 1800 mV
>s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
>Advanced Linux Sound Architecture Driver Version 1.0.23.
>cfg80211: Calling CRDA to update world regulatory domain
>Switching to clocksource clock_source_systimer
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>UDP hash table entries: 256 (order: 1, 12288 bytes)
>UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
>NET: Registered protocol family 1
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 136K
>PMU: registered new PMU device of type 0
>SMDKC110/V210 RTC, (c) 2010 Samsung Electronics
>smdkc110-rtc smdkc110-rtc: rtc core: registered s3c as rtc0
>S5PV210 ADC driver, (c) 2010 Samsung Electronics
>cpuidle: phy_regs_save:0x4fcc1000
>Loaded driver for PL330 DMAC-0 s3c-pl330
> DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
>Loaded driver for PL330 DMAC-1 s3c-pl330
> DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
>Loaded driver for PL330 DMAC-2 s3c-pl330
> DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
>ashmem: initialized
>ROMFS MTD (C) 2007 Red Hat, Inc.
>msgmni has been set to 776
>alg: No test for stdrng (krng)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>s3cfb s3cfb: [fb2] dma: 0x441ab000, cpu: 0xf1000000, size: 0x005dc000
>FIMD src sclk = 166750000
>s3cfb s3cfb: registered successfully
>Start display and show logo
>PA FB = 0x441AB000, bits per pixel = 32
>screen width=800 height=480 va=0xe41ab000 pa=0x441ab000
>xres_virtual = 800, yres_virtual = 1920, xoffset = 0, yoffset = 0
>fb_size=6144000
>Back frameBuffer[0].VAddr=e4322000 PAddr=44322000 size=1536000
>Back frameBuffer[1].VAddr=e4499000 PAddr=44499000 size=1536000
>Back frameBuffer[2].VAddr=e4610000 PAddr=44610000 size=1536000
>s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
>s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
>s5pv210-uart.2: s3c2410_serial2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10
>s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
>brd: module loaded
>loop: module loaded
>pmem_gpu1: 1 init
>Android kernel panic handler initialized (bind=kpanic)
>S3C NAND Driver, (c) 2008 Samsung Electronics
>S3C NAND Driver is using hardware ECC.
>NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
>Creating 7 MTD partitions on \"s5pv210-nand\":
>0x0000000c0000-0x000000100000 : \"misc\"
>0x000000100000-0x000000600000 : \"recovery\"
>0x000000600000-0x000000b00000 : \"kernel\"
>0x000000b00000-0x000000e00000 : \"ramdisk\"
>0x000000e00000-0x000007c00000 : \"system\"
>0x000007c00000-0x00000cc00000 : \"cache\"
>0x00000cc00000-0x000010000000 : \"userdata\"
>SPI: s3c_spi_init
>SPI.0: s3c_spi_probe
>s3c-spi s3c-spi.0: registered master spi0
>Samsung SoC SPI Driver loaded for Bus SPI-0 with 1 Slaves attached
> Max,Min-Speed [33350000, 130273]Hz
> Irq=79 IOmem=[0xe1300fff-0xe1300000] DMA=[Rx-22, Tx-23]
>SPI.1: s3c_spi_probe
>s3c-spi s3c-spi.1: registered master spi1
>Samsung SoC SPI Driver loaded for Bus SPI-1 with 1 Slaves attached
> Max,Min-Speed [33350000, 130273]Hz
> Irq=80 IOmem=[0xe1400fff-0xe1400000] DMA=[Rx-24, Tx-25]
>smsc911x: Driver version 2008-10-21.
>smsc911x-mdio: probed
>eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)
>net eth0: MAC Address: ba:b0:be:ad:00:00
>ehci_hcd: USB 2.0 \'Enhanced\' Host Controller (EHCI) Driver
>s5p-ehci s5p-ehci: s5pv210 EHCI
>s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
>s5p-ehci s5p-ehci: irq 87, io mem 0xec200000
>s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 1 port detected
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
>s3c-udc : version 15 March 2009 (DMA Mode)
>android init
>android_probe pdata: c0553ed0
>android_bind
>android_usb gadget: android_usb ready
>f_acm init
>android_register_function acm
>f_adb init
>android_register_function adb
>f_mass_storage init
>fsg_probe pdev: c0552d48, pdata: c0553ef4
>android_register_function usb_mass_storage
>f_mtp init
>android_register_function mtp
>f_rndis init
>android_register_function rndis
>rndis_function_bind_config MAC: 02:02:45:46:4F:48
>android_usb gadget: using random self ethernet address
>android_usb gadget: using random host ethernet address
>usb0: MAC aa:b1:88:8c:ce:66
>usb0: HOST MAC 76:7e:ba:d4:84:5d
>android_usb gadget: Mass Storage Function, version: 2009/09/11
>android_usb gadget: Number of LUNs=1
> lun0: LUN: removable file: (no medium)
>adb_bind_config
>mtp_bind_config
>mice: PS/2 mouse device common for all mice
>input: s3c-keypad as /devices/platform/s3c-keypad/input/input0
>s3c-keypad Initialized
>S3C Keypad Driver
>S5P Touchscreen driver, (c) 2008 Samsung Electronics
>S5P TouchScreen got loaded successfully : 12 bits
>input: S5P TouchScreen as /devices/virtual/input/input1
>input: compass as /devices/virtual/input/input2
>id:59 CMA3000_DEVICE_ID:37
>SUCCESS: Sensor CMA3000(CHIP:59 REV:10)
>CMA3000 regs: 59 10 10 08 00 00 00 00 00 08 33 08 1c 00 00
>using rtc device, s3c, for alarms
>i2c /dev entries driver
>i2c-gpio i2c-gpio.3: using pins 110 (SDA) and 109 (SCL)
>Linux video capture interface: v2.00
>mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
>
>S3C JPEG Driver, (c) 2007 Samsung Electronics
>JPEG driver for S5PV210
>i2c i2c-1: attached s5p_ddc into i2c adapter successfully
>S5PC11X HPD Driver, (c) 2009 Samsung Electronics
>S5PC11X CEC Driver, (c) 2009 Samsung Electronics
>s3c_bat_init
>sec-fake-battery sec-fake-battery: s3c_bat_probe
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
>s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133400000 Hz)
>s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz)
>KSSON20110309 func(sdhci_s3c_probe)....max_width(4)
>mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
>s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
>s3c-sdhci s3c-sdhci.2: clock source 1: hsmmc (133400000 Hz)
>s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
>KSSON20110309 func(sdhci_s3c_probe)....max_width(4)
>mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
>s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz)
>s3c-sdhci s3c-sdhci.3: clock source 1: hsmmc (133400000 Hz)
>s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)
>KSSON20110309 func(sdhci_s3c_probe)....max_width(4)
>mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
>logger: created 64K log \'log_main\'
>logger: created 256K log \'log_events\'
>logger: created 64K log \'log_radio\'
>logger: created 64K log \'log_system\'
>s3c_idma_preallocate_buffer: VA-f08c0000 PA-C0000000 163840bytes
>asoc: WM8580 PAIFRX <-> s3c64xx-i2s mapping ok
>asoc: WM8580 PAIFTX <-> s3c64xx-i2s mapping ok
>ASoC: Failed to create Rear-L/R debugfs file
>ASoC: Failed to create Center/Sub debugfs file
>ASoC: Failed to create Front-L/R debugfs file
>HDP Polling Task
>ALSA device list:
> #0: smdk (WM8580)
>TCP cubic registered
>NET: Registered protocol family 10
>android_usb gadget: high speed config #1: Android Composite
>lo: Disabled Privacy Extensions
>Mobile IPv6
>IPv6 over IPv4 tunneling driver
>sit0: Disabled Privacy Extensions
>ip6tnl0: Disabled Privacy Extensions
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>lib80211: common routines for IEEE802.11 drivers
>ThumbEE CPU extension supported.
>VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
>regulator_init_complete: disabling pd_mfc_supply
>regulator_init_complete: disabling pd_tv_supply
>regulator_init_complete: disabling pd_cam_supply
>smdkc110-rtc smdkc110-rtc: setting system clock to 1970-01-07 04:25:49 UTC (534349)
>FIMC0 registered successfully
>FIMC1 registered successfully
>FIMC2 registered successfully
><6>S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
>s5p-tvout s5p-tvout: hpd status is cable removed
>DBUG_PORT must not use AFC!
>Freeing init memory: 148K
>mmc0: new high speed SD card at address e624
>mmcblk0: mmc0:e624 SU02G 1.84 GiB
> mmcblk0:
>yaffs: dev is 32505860 name is \"mtdblock4\" rw
>yaffs: passed flags \"\"
> p1
>yaffs: dev is 32505862 name is \"mtdblock6\" rw
>yaffs: passed flags \"\"
>Mode changed (0->1)
>[wm8580_set_outpath] path(1)
>yaffs: dev is 32505861 name is \"mtdblock5\" rw
>yaffs: passed flags \"\"
>init: cannot find \'/system/etc/install-recovery.sh\', disabling \'flash_recovery\'
>init: cannot find \'chown\', disabling \'chown-backlight\'
>enabling adb
>Enabled => usb_mass_storage
>Enabled => adb
>adb_open
>android_usb gadget: high speed config #1: Android Composite
>net eth0: SMSC911x/921x identified at 0xf1600000, IRQ: 41
>sh: can\'t access tty; job control turned off
># eth0: IPv6 duplicate address fe80::b8b0:beff:fead:0 detected!
>mlan: version magic \'2.6.35.7-svn91 preempt mod_unload ARMv7 \' should be \'2.6.35.7 preempt mod_unload ARMv7 \'
>warning: `rild\' uses 32-bit capabilities (legacy support in use)
>PVR_K:(Warning): SysFinalise: Version string: SGX540 S5PC110 [478, drivers/gpu/pvr/s5pc110/sysconfig.c]
>request_suspend_state: wakeup (3->0) at 35371744711 (1970-01-07 04:26:23.672225043 UTC)