안녕하세요 마이크로비젼 기술지원팀입니다.
아래를 참고하여 작업을 진행해 보시길 바랍니다.
/kernel-2.6.35/drivers/char경로에서 vt.c파일을 아래와 같이 수정하시길 바랍니다.
수정 전
static int vesa_blank_mode; /* 0:none 1:suspendV 2:suspendH 3:powerdown */
static int vesa_off_interval;
static int blankinterval = 10*60;
core_param(consoleblank, blankinterval, int, 0444);
수정 후
static int vesa_blank_mode; /* 0:none 1:suspendV 2:suspendH 3:powerdown */
static int vesa_off_interval;
static int blankinterval = 0;
core_param(consoleblank, blankinterval, int, 0444);
위와 같이 수정한 후에 이미지를 새롭게 생성 한 후에 보드에 write하여 테스트를 해보시길 바랍니다.