안녕하세요 마이크로비젼 기술지원팀입니다.
보드가 부팅하기 전에 LAN케이블을 연결하신 후에 부팅을 하시길 바랍니다. 아래 방법은 보드에서 ping
테스트를 하여 정상적으로 동작하는 메시지 입니다.
/ #
/ # ifconfig eth0
eth0: ip 192.168.1.3 mask 255.255.255.0 flags [up broadcast running multicast]
/ # ping 192.168.1.2 &
[1] 17421 ping 192.168.1.2
/ # PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data.
64 bytes from 192.168.1.2: icmp_seq=1 ttl=64 time=1.30 ms
64 bytes from 192.168.1.2: icmp_seq=2 ttl=64 time=0.547 ms
64 bytes from 192.168.1.2: icmp_seq=3 ttl=64 time=0.498 ms
64 bytes from 192.168.1.2: icmp_seq=4 ttl=64 time=0.511 ms
64 bytes from 192.168.1.2: icmp_seq=5 ttl=64 time=0.533 ms
PC와 보드간에 연결은 당사에서 제공해 드린 cross cable을 이용하여 연결을 하시길 바랍니다. 보드에 IP를
설정하시기 위해선 아래 명령어를 이용하시면 됩니다.
#ifconfig eth0 xxx.xxx.xxx.xxx up