안녕하세요 마이크로비젼 기술지원팀입니다.

아래 방법을 참고하여 작업을 진행해 보시길 바랍니다.

커널에서 아래와 같이 설정을 합니다.

#make menuconfig

make menuconfigà

           File systems  --->

                     [*] Network File Systems  --->

                                --- Network File Systems                                                                          x x

  x x                           <*>   NFS client support                                                                          x x

  x x                           [*]     NFS client support for NFS version 3                                                      x x

  x x                           [*]       NFS client support for the NFSv3 ACL protocol extension                                 x x

  x x                           [*]     NFS client support for NFS version 4 (EXPERIMENTAL)                                       x x

x x                           [*]       NFS client support for NFSv4.1 (DEVELOPER ONLY)

위와 같이 설정을 하신 후에 새롭게 이미지를 생성하여 보드에 write을 하신 후에 테스트를 진행하시길 바랍니다.

NFS를 연동하여 정상적으로 동작하는 것을 확인 하실 수 있습니다.

/ #

/ # ifconfig eth0

eth0: ip 192.168.1.3 mask 255.255.255.0 flags [up broadcast running multicast]

/ #

/ # cd /mnt/sdcard/nfs/

/mnt/sdcard/nfs # ls

/mnt/sdcard/nfs # cd /

/ # system/usr/bin/mount -t nfs -o nolock 192.168.1.2:/nfs mnt/sdcard/nfs/

/ #

/ # cd /mnt/sdcard/nfs/

/mnt/sdcard/nfs # ls

rambase

rootfs_1

bplay-0.991

capture

eabi.cramfs

v310

rootfs

arecord

aplay

/mnt/sdcard/nfs #

/mnt/sdcard/nfs # cd /

/ # umount /mnt/sdcard/nfs/

/ # cd /mnt/sdcard/nfs/

/mnt/sdcard/nfs # ls

/mnt/sdcard/nfs #